Port Price & Config

PORT PRICE & CONFIGURATION

Port Size	NRC/OTC	MRC	Media Type
1G	None	SGD 300	LX over SMF
10G	None	SGD 950	LR over SMF
2 x 10G	None	SGD 1800	LR over SMF
3 x 10G	None	SGD 2600	LR over SMF
4 x 10G	None	SGD 3200	LR over SMF
100G	None	SGD 4200	LR4 over SMF

Port price exclude cross-connect.
Price exclude VAT.
There is no minimum contract term.

Please email us at info@sgix.sg for more information.

Router connected directly to SGIX

Using a router to connect to SGIX is the preferred design and below is the recommended router interface configuration (Cisco IOS). Member need to adapt this configuration to their respective platform when connecting to SGIX fabric.

GigabitEthernet X/X/X
  description Facing SGIX Port
  ip address <your_allocated_ipv4_address>
  ipv6 address <your_allocated_ipv6_address> 
  no cdp enable
  no mop enable
  no ip mask-reply
  no ip proxy-arp
  no ip redirects
  no ip directed-broadcast
  no ip unreachables
  no keepalive
  no lldp transmit
  no lldp receive
  no udld enable
  ipv6 nd ra suppress all
  ipv6 nd prefix default no-advertise

Router connected to SGIX via an Intermediate Switch

The intermediate switch connecting both the BGP router and SGIX MUST have a dedicated vlan with no other additional devices in that vlan. SGIX only allow one MAC address per member port. Below is the recommended switch port configuration facing SGIX. If bpdufilter feature is not available in your platform, we recommend that member disable spanning-tree on the dedicated vlan.

vlan XXX
  name SGIX

GigabitEthernet X/X/X
  description Facing SGIX Port
  switchport mode access
  switchport access vlan XXX
  switchport nonegotiate
  spanning-tree bpdufilter enable
  no keepalive
  no cdp enable
  no lldp receive
  no lldp transmit
  no udld enable

Contact us